Airworthiness Directive

Hide details for Federal Register InformationFederal Register Information
[Federal Register: August 18, 1966]



Hide details for Header InformationHeader Information
DEPARTMENT OF TRANSPORTATION

Federal Aviation Administration

14 CFR Part 39

Amendment 39-276; AD 66-20-05



Airworthiness Directives; Piper Model PA-28-150, PA-28-160, and PA-28-180 Airplanes
PDF Copy (If Available):


Hide details for Preamble InformationPreamble Information
AGENCY: Federal Aviation Administration, DOT





DATES: Effective August 27, 1966.






Hide details for Regulatory InformationRegulatory Information

66-20-05 PIPER: Amdt. 39-276 Part 39 Federal Register August 18, 1966. Applies to Model PA-28-150, -160, and -180 Airplanes, Serial Numbers 1761 through 3533.

Compliance required within the next 25 hours' time in service after the effective date of this AD, unless already accomplished.

To prevent failures of the propeller spinner assembly, remove propeller spinner, P/N 63760 or 63760-03 as applicable, and propeller spinner attaching bulkhead, P/N 65208 or 65208- 03, as applicable, or accomplish the following:

(a) For Model PA-28-150 and -160 airplanes, Serial Numbers 28-1761 through 28- 2434, modify spinner in accordance with Piper Service Letters Nos. 457 and 471A, and install spinner bulkhead assembly, P/N 65804-04; spacer, P/N 65806-00; and new propeller bolts, P/N AN 76-55S; in accordance with Piper Service Kit No. 757-047 or an FAA-approved equivalent.

(b) For Model PA-28-150 and -160 airplanes, Serial Numbers 28-2435 through 28- 3199, modify spinner in accordance with Piper Service Letter No. 471A, and install spinner bulkhead assembly, P/N 65804-04; spacer, P/N 65806-00; and new propeller bolts, P/N AN 76- 55S; in accordance with Piper Service Kit No. 757-047 or an FAA-approved equivalent.

(c) For Model PA-28-150 and -160 airplanes, Serial Numbers 28-3200 through 28- 3533, install spinner bulkhead assembly, P/N 65804-04; spacer, P/N 65806-00; and new propeller bolts, P/N AN 76-55S; in accordance with Piper Service Kit No. 757-047 or an FAA-approved equivalent.

(d) For Model PA-28-180 airplanes, Serial Numbers 28-1761 through 28-2434, modify spinner in accordance with Piper Service Letters Nos. 457 and 471A, and install spinner bulkhead assembly, P/N 65804-00, in accordance with Piper Service Kit No. 757-046 or an FAA-approved equivalent.

(e) For Model PA-28-180 airplanes, Serial Numbers 28-2435 through 28-3199, modify spinner in accordance with Piper Service Letter No. 471A, and install spinner bulkhead assembly, P/N 65804-00, in accordance with Piper Service Kit No. 757-046 or an FAA-approved equivalent.

(f) For Model PA-28-180 airplanes, Serial Numbers 28-3200 through 28-3533, install spinner bulkhead assembly, P/N 65804-00, in accordance with Piper Service Kit No. 757- 046 or an FAA-approved equivalent.

(Piper Service Bulletin No. 234 also pertains to this subject.)

This directive effective August 27, 1966.