| | | |
|---|
 | | SA3285WE | | Installation of George M. Adams DGA-2000 or Bodell BMI-2000 wheels and Bodell BMI-252 brakes. | | |
| | SA3601NM | | Installation of landing gear fueling step. | | |
| | SA739GL | | Superseded by STC SA01944CH. Modify airplane to fly on unleaded automotive gasoline, 87 minimum... | | |
 | | SA1144SO | | Removal of cabin entrance door and installation of placards. | | |
| | SA4-1080 | | Ceconite 101 covering of complete airframe. | | |
| | SA1582NM | | Installation of replacement long-life lift strut. | | |
| | SA1-510 | | Installation of Sur-Vent fuel tank filler cap manufactured. | | |
| | SA02007AK | | Installation of main landing gear long step no. 3195. | | |
| | SA396AL | | Conversion of 4-inch wheels and brakes to 6-inch wheels and brakes. | | |
| | SA99AL | | Installation of six-inch wheels and brakes. | | |
| | SA293AL | | Installation of Stoddard improved brake system. | | |
| | SA02002SE | | Installation of vortex generators on the above model aircraft | | |
| | SA495AL | | Installation of Lycoming O-290-D engine (125 hp) using Stoddard Model 501 engine mount. | | |
| | SA01704LA | | Installation of the Grove Disk Brake System | | |
| | SA00207AT | | Installation of carbon steel brake discs that have melonite surface treatment, P/N AA-67. | | |
| | SA2NE | | Installation of Cleveland wheels and brakes, 7.00-6 or 6.00-6, C38500-HA, 40-6, in accordance with... | | |
| | SA2508SO | | Replacement of Cleveland brake discs, No. 164-67 or 164-167, with Appalachian Accessories'... | | |
| | SA01063CH | | Installation of a Scott Model 3200 Tail Wheel with the AESI #T.S.05P Tail Spring. | | |
| | SA5-65 | | Installation of Goodyear 25 x 11.0 - 4 Type IV tires with tubes on Goodrich Model 841696 4-inch... | | |
| | SA8075SW (PAGE 3) | | Installation of fiberglass covering. (M-62 SERIES PT-19) (G-73 SCHWEIZER) | | |
| | SA01334CH | | Installation of a 19-gallon wing fuel tank. | | |
| | SA3606NM | | Installation of landing gear fueling step. | | |
| | SA320CE | | Lycoming O-290-D2 engine and Sensenich M76A-M2/7452 propeller. | | |
| | SA5-33 | | Removed unbalanced tail surfaces and installed balanced tail surfaces. Install elevators, Piper... | | |
| | SA819CE | | Install Aero Model M1500, M1800 or M2000 main skis. | | |
| | SA1534NM | | Installation of stamped aluminum wing ribs. | | |
| | SA354AL | | Installation of AD 2500x10.5 wheel replacement skis and rigging. | | |
| | SA176CE | | Removal of door and installation of placard. | | |
| | SA3AL | | Installation of Fred A. Shaw tundra-bird Model 2500 skis. | | |
| | SA01944CH (2 OF 2) | | Modify airplane to fly on unleaded automotive gasoline, 87 minimum antiknock index, per ASTM... | | |
 | | SA1351WE (PG 2) | | Replace existing fabric on wings, fuselage, empennage, and/or control surfaces, with Ceconite101... | | |
| | SA02093AK | | Installation of hourmeter airspeed switch. | | |
| | SA5704NM | | Installation of PA-12 metal wing spars, two aluminum wing tanks, removal of header tank, rerouting... | | |
| | SA144AL | | Remote compass bracket. | | |
| | SA262AL | | Install 6x6x44 fish pole tube. | | |
| | SA5-9 | | 25x11x4 tires and tubes with Airglass Engineering Company adapters LWA 950. | | |
| | SA10126SC (2 OF 2) | | Installation of Aero Advantage ADV200 series vacuum pump per Aero Advantage Drawing Number ADVMSI... | | |
| | SA02525LA | | Installation of Wheel and Brake Assemblies | | |
| | SA11SW | | Removal of outer wing tip bow. | | |
| | SA02371AK | | Installation of Lycoming O-320-B2B engine, McCauley 1A175/GM propeller and modification of airframe | | |
| | SA582NW | | Fabrication of replacement wire rope cable assemblies | | |
| | SA95AL | | Maule SFS-1-4-P8 tail wheel; Hayes D-15-26 brake assembly using Kennedy Air Service adapter 64-1;... | | |
| | SA02214AK | | Installation of Alpha Omega Suspension System in place of original bungees or bungees and... | | |
| | SA01343WI | | Installation of B&C Specialty Products BC400 alternator | | |
| | SA220SO | | Tow bar, release mechanism, and safety tow link. | | |
| | SA00932SE | | Installation of the Stewart wing tip assembly | | |
| | SA305AL | | Fabrication and installation of Stoddard 13 gallon fuel tank in left wing per Stoddard Aero Service... | | |
| | SA02033AT (PAGE 3) | | Modification to install an air-oil separator to prevent oil from being aspirated from the engine... | | |
| | SA2666WE | | Ceconite 102 material covering complete aircraft. (262A SERIES -12) | | |
| | SA69NW | | Installation of Matney's engine charge air-air filter assembly. (AA-1B, AA-1, AA-1A 1969 AND ON)... | | |
| | SA5755NM | | Installation of a propeller anti theft device. | | |
| | SA01765SE | | Installation of Alaskan Bushwheel TSO-C26d wheels, Part Number (P/N) ABI-1010 | | |
| | SA01233SE | | Manufacture and installation of Alaskan Bushwheel tail wheel and fork assembly | | |
 | | SA4305WE | | Installation of GAR-AERO wheel adapters and tundra type tires on the main landing gear | | |
| | SA02428AK | | Installation of a hydraulically actuated ski drag assembly | | |
| | SA3635NM | | Fabrication of North River Model8400 brake booster assembly and modification of Scott Aviation ... | | |
| | SA00780SE (PAGE 1) | | Installation of the True Lock Safety Retention Axle Lock Nut System | | |
| | SA02128LA | | Installation of aileron and flap hinge repair bushings | | |
| | SA1455NM | | Installation of a flame proof auxiliary heater-dryer, Model12-1600. | | |
| | SA02110CH (PAGE 2) | | Installation of a Time Trac Data Recorder | | |
| | SA01015SE | | Installation of eligible Alaska Bushwheel, Inc. wheels and TSO-C62d tires | | |
| | SA01956SE | | ONE ONLY STC, SN 5-397: Installation of the following: Installation of the following: PA-12... | | |
| | SA02168AK (PG 2) | | Installation of hourmeter airspeed switch. For unpressurized aircraft only. Pressurized aircraft... | | |
| | SA02168AK (PG 1) | | Installation of hourmeter airspeed switch. For unpressurized aircraft only. Pressurized aircraft... | | |
| | SA02553AK | | Fabrication and installation of a Tail Wheel Anti-Shimmy Dampener | | |
| | SA10077SC | | Installation of push-button starter system. | | |
| | SA01026SE (PAGE 1) | | Improved fuel gascolator assembly. | | |
| | SA7965SW | | Application of fabric and polyurethane finishing system. | | |
| | SA1008WE | | Installation of Poly-Fiber covering material. | | |
| | SA4302NM (PAGE 2) | | Installation of Electronics Int'l digital automatic engine analyzer. | | |
| | SA00081NY | | Installation of Iceman Aviation Supplies, Inc. Carburetor Ice Detector. | | |
| | SA489EA | | Installation of ARP Inc. carburetor ice detection system | | |
| | SA02520AT | | Installation of M-20 Oil Separator, model 600-WP. | | |
| | SA1626NM Page 2 | | Installation of Electronics Int'l Digital EGT/CHT Instruments and accessories. (201 Series) | | |
| | SA4503NM (Page 1) | | Install Ceconite covering material. | | |
| | SA5159NM (1 OF 2) | | Installation of chip detector system. | | |
| | SA03898NY | | Installation and maintenance of ORATEX covering and coating material | | |
| | SA01734SE (PG 3) | | Application of Stewart Systems synthetic fabric covering system to aircraft fuselage, wings, tail... | | |
| | SA00780SE (PAGE 4) | | Installation of the True Lock Safety Retention Axle Lock Nut System | | |
| | SA10921SC | | Installation of an alternator and regulator as a replacement to existing OEM generators and... | | |
| | SA00680SE (5 OF 6 | | Installation of Electronics International model UBG-16 or UBG-16T bar graph engine analyzer. | | |
| | SA04776NY (1 OF 2) | | The HIPEC Covering and Finishing System must be performed and maintained | | |
| | SA02402SE Page 1 | | Installation of Electronics International Inc. Glass Panel Engine Monitor (with In-Flight Data)... | | |
| | SA02283SE Page 1 | | Installation of Electronics International Inc. Glass Panel Engine Monitor (with In Flight Data)... | | |
| | SA00024NY | | Installation of Airwolf remote mounted engine oil filter kit AFC-K007 on single or multi-engine... | | |
| | SA02212AK (PG 1) | | Replacement of existing landing and/or taxi light reflector and bulbs with high intensity discharge... | | |
| | SA02110CH (PAGE 3) | | Installation of a Time Trac Data Recorder | | |
| | SA02110CH (PAGE 4) | | Installation of a Time Trac Data Recorder | | |
| | SA02110CH (PAGE 1) | | Installation of a Time Trac Data Recorder | | |
| | SA2190NM Page 1 | | Installation of electronics International Digital Volt/Amp Gauges and Accessories. | | |
| | SA2350NM Page 1 | | Installation of Electronics International Inc digital carburetor/outside air temperature gauges | | |
| | SA00344BO PAGE 1 | | Installation of Parmetheus Plus LED PAR36 and PAR46 taxi and landing lights. | | |
| | SA00478CH | | Installation of Cooper Superflite 102 Fabric. | | |
| | SA01765SE (PAGE 2) | | Installation of Alaskan Bushwheel Inc (ABI) TSO-C26d wheels, Part Number (P/N) ABI-1010. | | |
 | | SA01669CH (PAGE 1) | | Installation of Challenger Reusable Air Filters. | | |
| | SA593CH (Page 1) | | Install Champion SlickSTART magneto booster system. | | |
| | SA02268CH (PAGE 3) | | Installation of Airwolf Filter Corp. Air Oil Separator | | |
| | SA00079NY | | Installation of Airwolf remote mounted engine oil filter kit AFC-K008 on single and multi engine... | | |
| | SA71GL | | Installation of air filters | | |
| | SA01669CH | | Installation of Challenger Reusable Air Filter | | |
| | SA01026SE (PAGE 2) | | Improved fuel gascolator assembly. | | |
| | SA4-1210 | | Installation of Eonnex cover on aircraft surfaces. | | |
| | SA00780SE (PAGE 2) | | Installation of the True Lock Safety Retention Axle Lock Nut System | | |
| | SA00780SE (PAGE 3) | | Installation of the True Lock Safety Retention Axle Lock Nut System | | |
| | SA01988SE (PAGE 2) | | Installation of Electronics International Inc. Glass Panel Engine Monitor (with In-Flight Data)... | | |
| | SA01988SE (PAGE 3) | | Installation of Electronics International Inc. Glass Panel Engine Monitor (with In-Flight Data)... | | |
| | SA01988SE (PAGE 6) | | Installation of Electronics International Inc. Glass Panel Engine Monitor (with In-Flight Data)... | | |
| | SA01988SE (PAGE 1) | | Installation of Electronics International Inc. Glass Panel Engine Monitor (with In-Flight Data)... | | |
| | SA01988SE (PAGE 5) | | Installation of Electronics International Inc. Glass Panel Engine Monitor (with In-Flight Data)... | | |
| | SA01988SE (PAGE 4) | | Installation of Electronics International Inc. Glass Panel Engine Monitor (with In-Flight Data)... | | |
| | SA02283SE Page 2 | | Installation of Electronics International Inc. Glass Panel Engine Monitor (with In Flight Data)... | | |
| | SA01800SE (PG 4) | | Fabrication and installation of new or replacement of existing instrument panel lights dimmer... | | |
| | SA01800SE (PG 2) | | Fabrication and installation of new or replacement of existing instrument panel lights dimmer... | | |
| | SA01800SE (PG 3) | | Fabrication and installation of new or replacement of existing instrument panel lights dimmer... | | |
| | SA01800SE (PG 1) | | Fabrication and installation of new or replacement of existing instrument panel lights dimmer... | | |
| | SA02402SE Page 2 | | Installation of Electronics International Inc. Glass Panel Engine Monitor (with In-Flight Data)... | | |
| | SA02268CH (PAGE 6) | | Installation of Airwolf Filter Corp. Air Oil Separator | | |
| | SA02268CH (PAGE 4) | | Installation of Airwolf Filter Corp. Air Oil Separator | | |
| | SA02268CH (PAGE 5) | | Installation of Airwolf Filter Corp. Air Oil Separator | | |
| | SA02268CH (PAGE 2) | | Installation of Airwolf Filter Corp. Air Oil Separator | | |
| | SA02268CH (PAGE 1) | | Installation of Airwolf Filter Corp. Air Oil Separator | | |
| | SA2190NM Page 2 | | Installation of electronics International Digital Volt/Amp Gauges and Accessories. | | |
| | SA00680SE (3 OF 6 | | Installation of Electronics International model UBG-16 or UBG-16T bar graph engine analyzer. | | |
| | SA00680SE (6 OF 6 | | Installation of Electronics International model UBG-16 or UBG-16T bar graph engine analyzer. | | |
| | SA00680SE (2 OF 6 | | Installation of Electronics International model UBG-16 or UBG-16T bar graph engine analyzer. | | |
| | SA00680SE (4 OF 6 | | Installation of Electronics International model UBG-16 or UBG-16T bar graph engine analyzer. | | |
| | SA02386AK | | Replacement of existing landing and/or taxi light reflector and bulbs with Light Emitting Diode... | | |
| | SA01861SE (PAGE 1) | | Fabrication and installation of Landing Light Controller | | |
| | SA01734SE (PG 1) | | Application of Stewart Systems synthetic fabric covering system to aircraft fuselage, wings, tail... | | |
| | SA02212AK (PG 2) | | Replacement of existing landing and/or taxi light reflector and bulbs with high intensity discharge... | | |
| | SA00344BO PAGE 2 | | Installation of Parmetheus Plus LED PAR36 and PAR46 taxi and landing lights. | | |
| | SA04776NY (2 OF2) | | The HIPEC Covering and Finishing System must be performed and maintained | | |
| | SA01734SE (PG 4) | | Application of Stewart Systems synthetic fabric covering system to aircraft fuselage, wings, tail... | | |
| | SA593CH (Page 2) | | Install Champion SlickSTART magneto booster system. | | |
| | SA01734SE (PG 2) | | Application of Stewart Systems synthetic fabric covering system to aircraft fuselage, wings, tail... | | |
| | SA01757WI | | To allow the use of UL91 or UL94 (minimum) grade aviation fuel | | |