| | | |
|---|
 | | SA02089AK | | Installation of Airglas LW2500 fixed wheel penetration skis. | | |
| | SA02123AK | | Installation of Baumann Model BF-2100 floats. | | |
| | SA3625NM | | Application of polyurethane finishing system. | | |
| | SA630AL | | Install fiberglass wing tip assembly. | | |
| | SA688AL | | Installation of left side cabin door. | | |
| | SA686AL | | Installation of PA-18 main landing gear. | | |
| | SA398AL | | Conversion of 4-inch wheels and brakes to 6-inch wheels and brakes. | | |
| | SA645AL | | Install Avco Lycoming O-320-D2A or O-320-B2B engine and McCauley1A175/GM8246 prop. | | |
| | SA702AL | | Installation of skis. | | |
| | SA657AL | | Install Avco Lycoming O-320-A2B or O-320-E2D engine and McCauley1A175/GM 8246 propeller. | | |
| | SA690AL | | Increase gross weight to 1,935 lbs. | | |
| | SA368AL | | Installation of McCauley1A175/GM8242, GM8244, or GM8246 propellers. | | |
| | SA647AL | | Install Motorola 32.5 amp alternator. | | |
| | SA253AL | | Installation of McCauley 1A175/GM propeller. | | |
| | SA505AL | | Installation of landing gear safety cables. | | |
| | SA4-410 | | Installation Lycoming 150 hp engine O-320-A2A. | | |
| | SA1536NM | | Installation of stamped aluminum wing ribs. | | |
| | SA3-106 | | Edo 89-2000 floats, water rudder and auxiliary tail fin. | | |
| | SA2083CE | | Operation of airplane on unleaded automotive gasoline, 87 minimum antiknock index and leaded... | | |
| | SA192AL | | Flap handle installation and adjustable fore and aft pilot and co-pilot's seat. | | |
| | SA289AL | | Install rudder centering device. | | |
| | SA213SO | | Electric fuel quantity indicator. indicator. | | |
| | SA148AL | | PA-18 main landing gear and installation of EDO 2000 floats. | | |
| | SA83AL | | Installation of Lycoming O-320 Series engines, and Sensenich M74DM propeller, and Stoddard engine... | | |
| | SA4-412 | | Large PA-18 tail surfaces. | | |
| | SA496AL | | Installation of leading edge cuff. (PA-14 Seaplanes) | | |
| | SA4-411 | | Modification of fuel system to PA-18 to facilitate takeoff either tank. | | |
| | SA00349SE | | Installation of numerous items re photographs in FAA project file. | | |
| | SA469AL | | Installation of electric fuel gauges. | | |
| | SA189AL | | Install left side cabin door. | | |
| | SA4-913 | | Ceconite 101 covering of wings, fuselage and vertical fin. | | |
| | SA502AL | | Installation of cargo door in right side of aircraft. | | |
| | SA3603NM | | Installation of landing gear fueling step. | | |
| | SA356AL | | Installation of AD 2500x10.5 wheel replacement skis and rigging. | | |
| | SA4617NM | | Fabrication and installation of P/N 3166-2 main landing gear cabane vee assembly. | | |
| | SA1584NM | | Installation of replacement long-life lift strut. | | |
| | SA1344GL | | Surrendered and incorporated into STC SA00478CH. | | |
| | SA4-81 | | Lycoming O-290-D2 engine and Sensenich M76AM-2/74-52 propeller. | | |
| | SA528AL | | Installation of welded steel rear float fittings. | | |
 | | SA02021AK | | Fabrication and installation of wing front spar lift strut fitting reinforcing brackets | | |
| | SA57NW | | Installation of Lycoming O-320 series engine, McCauley 1A170/1C172 and Sensenich M74DM propellers... | | |
| | SA4-561 | | Application of glass cloth to fuselage and to horizontal and vertical stabilizer. | | |
| | SA3213WE | | Installation of George M. Adams DGA-2000 or Bodell BMI-2000 wheels and Bodell BMI-252 brakes. | | |
| | SA215AL | | Install L-2500A wheel replacement skis. | | |
| | SA541AL | | Installation of Avco Lycoming O-360-A2A engine and McCauley 1A200/DFA8245 propeller. For PA-14... | | |
| | SA717AL | | Installation of Schneider Model SWS-4000 main wheel skis and Schneider Model SWS-1000 tail wheel... | | |
| | SA01104CH | | Installation of Swing Type Engine Mount. | | |
| | SA01074CH | | Installation of Air-Energy Service Inc. Leading Edge, Part Number AESI #1511. | | |
| | SA5781NM | | Installation of Model 3140-51630.5 gallon wing fuel tanks. | | |
| | SA190AL | | Increased gross weight to1935 pounds. | | |
| | SA2610CE | | Operation of airplane on leaded or unleaded automotive gasoline, 91 minimum antiknock... | | |
| | SA2345NM | | Installation of SWS-11000 Tundra tires, wheels, and hubs. | | |
| | SA41AL | | Six inch wheels and brakes. | | |
| | SA147AL | | Electric fuel quantity gauge system. | | |
| | SA1903NM | | Installation of Schneider wheel skis, 6-inch to 10-inch aluminum wheel adapters and 29x11.0-10 8... | | |
| | SA950GL | | Superseded by STC SA01944CH. Modify airplane to fly on unleaded automotive gasoline, 87 minimum... | | |
| | SA5-60 | | Installation of Russ Simpson sea fins. | | |
| | SA00467SE | | Fabrication and installation of vortex generators mounted on the wings and a tail strake mounted on... | | |
| | SA4620NM | | Fabrication and installation of P/N 3164-2 main landing gear shock strut assemblies. | | |
| | SA22RM | | Manufacture of exact replacement parts, front and rear lift strut assembly. | | |
| | SA149AL | | Installation of auxiliary baggage compartment. | | |
| | SA573SW | | Installation of Plane Booster wing tip kit 101-250. | | |
| | SA5-39 | | Large horizontal stabilizers and elevators. | | |
| | SA02190AK | | Fabrication and installation of p/n 3344A main landing gear safety cable kit for 3-inch extended... | | |
| | SA2040AK | | Installation of vented fuel cap assembly (P/N 3267). | | |
| | SA02188AK | | Fabrication and installation of p/n 3284 three-inch extended PA-18 type main landing gear, together... | | |
| | SA262AL | | Install 6x6x44 fish pole tube. | | |
| | SA144AL | | Remote compass bracket. | | |
| | SA5-9 | | 25x11x4 tires and tubes with Airglass Engineering Company adapters LWA 950. | | |
| | SA02115AK | | Fabrication and installation of 30.5 gallon wing fuel tank sight gages. | | |
| | SA95AL | | Maule SFS-1-4-P8 tail wheel; Hayes D-15-26 brake assembly using Kennedy Air Service adapter 64-1;... | | |
| | SA1-510 | | Installation of Sur-Vent fuel tank filler cap manufactured. | | |
| | SA4-977 | | Installation of Fiberglass rudder post mount for either Grimes or Whelen WRM rotating beacons. | | |
| | SA02388AK | | Installation of Alaska Aircraft Products, LLC PA-12 Hot Rod Muffler | | |
| | SA03327CH | | Installation of engine mount, engine cowling and carburetor air box | | |
| | SA196SW | | Installation of Hartzell model HC-82XL-6F/7636D-4 propeller, Woodward governor 210080P, Piper... | | |
| | SA03328CH | | Installation of Lycoming O-320 or O-360 engine | | |
| | SA378SW | | Installation of Lycoming O-320 engine | | |
| | SA99AL | | Installation of six-inch wheels and brakes. | | |
| | SA1-644 | | Installation of Edo 89-2000 floats, water rudder and seaplane fin. | | |
| | SA293AL | | Installation of Stoddard improved brake system. | | |
| | SA2NE | | Installation of Cleveland wheels and brakes, 7.00-6 or 6.00-6, C38500-HA, 40-6, in accordance with... | | |
| | SA126SO | | Installation of wing fabric attachment clips. | | |
| | SA1-573 | | Lycoming O-320 150 hp engine with PA-18A-150 cylinder baffles, Sensenich M74DM propeller and... | | |
| | SA02170AK | | Installation of McCauley propellers, Models 1A175-GM8241 through 1A175-GM8244. | | |
| | SA1-51 | | Installation of a Lycoming O-290-D2 engine in combination with Edo 89-2000 floats and water rudder... | | |
| | SA534AL | | Installation of auxiliary fuel tank. | | |
| | SA460SW | | Install wing tips in accordance with Cub Crafters, Inc. Master Drawing List., MDL102400, Revision... | | |
| | SA11RM | | Installation of modified axles, wheels and brakes | | |
| | SA02007AK | | Installation of main landing gear long step no. 3195. | | |
| | SA00132SE | | Fabrication of F. Atlee Dodge aft fuselage weld-on fittings for the mounting of Edo Model 89-2000... | | |
| | SA98CH | | Installation of replacement wing ribs. | | |
| | SA1629WE | | Installation of left-hand door and associated fuel line routing and stabilizer trim cable changes.... | | |
| | SA02040AK | | Installation of vented fuel cap assembly (P/N 3267) | | |
| | SA02433AK | | Installation of F. Atlee Dodge Oversize rudder and/or elevators | | |
| | SA2313SW | | Install 22-1/2 gallon fuel tank. | | |
| | SA548AL | | Installation of Piper PA-18 type landing gear. | | |
| | SA02231AK | | Installation of Cleveland Main Wheels and Brakes. | | |
| | SA594AL | | Installation of Day & Night, Inc. extended flaps and modified ailerons and flap control system on a... | | |
| | SA595AL | | Installation of Day & Night, Inc. swept vertical tail and reduced-sized square horizontal surfaces... | | |
| | SA538AL | | Installation of modified landing gear (PA-18 type) with main landing gear legs lengthened6 inches. | | |
| | SA02316AK | | Installation of 8.50-6 and 8.50-10 tires | | |
| | SA477AL | | Installation of fiberglass wing tips. | | |
| | SA04474CH | | Installation of Rubbert Exhaust Assembly RR-1210, RR-1210-HR, RR-1212 and RR-1212-HR on Piper... | | |
| | SA03034CH | | Installation of new engine baffling assembly and new oil coolers | | |
| | SA562AL | | Installation of Day & Night 2-4 aluminum engine cowling. | | |
| | SA546AL | | Installation of Day & Night 4-1 fiberglass propeller spinner. | | |
| | SA598AL | | Installation of Day & Night modified flap control system. | | |
| | SA593AL | | Installation of Day & Night, Inc. square horizontal stabilizers, elevators, and rudder on Piper... | | |
| | SA5-66 | | Structural approval only of Fred A. Shaw engine mount and forward fuselage modification for... | | |
| | SA01063CH | | Installation of a Scott Model 3200 Tail Wheel with the AESI #T.S.05P Tail Spring. | | |
| | SA2508SO | | Replacement of Cleveland brake discs, No. 164-67 or 164-167, with Appalachian Accessories'... | | |
| | SA5-33 | | Removed unbalanced tail surfaces and installed balanced tail surfaces. Install elevators, Piper... | | |
| | SA02734CH | | Installation of Lightweight Battery and Circuit Breaker Master Switch in lieu of original... | | |
| | SA4635NM | | Modification of wing lift struts. | | |
| | SA600AL | | Extend flaps and modified aileron and flap control sys. | | |
| | SA5-13 | | Installation of 8.50x6 tires and tubes with Hayes 6-inch wheels. | | |
 | | SA214AL | | Installation of Airglas Engineerins Model L-1650A and L2000A Wheel Replacment Skis | | |
| | SA02421AK | | Installation and rigging of F.Atlee Dodge Model F.A. DODGE X-1 wheel replacement skis | | |
| | SA02049AK | | Fabrication and installation of Airglas Engineering Co., Inc. Model LTC18 cargo pod/bell | | |
| | SA02299AK | | Installation of a replacement fuel selector valve. | | |
| | SA02295AK | | Installation of a high capacity fule gascolator assembly. | | |
| | SA4-78 | | Installation of a Lycoming O-320 engine and Sensenich M74DM59 propeller. Installation of Piper... | | |
| | SA00805CH | | Installation of Air-Energy Service Inc. (AESI) P/N AESI-12-1900 (-1) wing fuel tanks. | | |
| | SA3606NM | | Installation of landing gear fueling step. | | |
| | SA02452AK | | Installation of F. Atlee Dodge Aircraft Services, LLC, Pilot’s Safety Barrier Net | | |
| | SA3634NM | | Fabrication of North River Avia. Model 8400 brake booster assembly, and modifcation of Scott... | | |
| | SA2127WE | | Installation of Madras Air Service Model 104 wing tips. | | |
| | SA02309AK | | Installation of a stabilizer trim system | | |
| | SA3AL | | Installation of Fred A. Shaw tundra-bird Model 2500 skis. | | |
| | SA02321AK | | Installation of EDO 89-2000 floats modified | | |
| | SA567AL | | Installation of O-320-A2B Lycoming engine. | | |
| | SA5-65 | | Installation of Goodyear 25 x 11.0 - 4 Type IV tires with tubes on Goodrich Model 841696 4-inch... | | |
| | SA8075SW (PAGE 3) | | Installation of fiberglass covering. (M-62 SERIES PT-19) (G-73 SCHWEIZER) | | |
| | SA02128LA | | Installation of aileron and flap hinge repair bushings | | |
| | SA308EA (2 OF 2) | | Installation of carburetor ice detection system 105AP in single and twin engine aircraft and single... | | |
| | SA4-840 | | Fabric replaced with glass cloth on wings, fuselage, empennage and/or control surfaces. | | |
| | SA637NW | | Installation of oil filter kit | | |
| | SA02214AK | | Installation of Alpha Omega Suspension System in place of original bungees or bungees and... | | |
| | SA01343WI | | Installation of B&C Specialty Products BC400 alternator | | |
| | SA02525LA | | Installation of Wheel and Brake Assemblies | | |
| | SA01704LA | | Installation of the Grove Disk Brake System | | |
| | SA02168AK (PG 2) | | Installation of hourmeter airspeed switch. For unpressurized aircraft only. Pressurized aircraft... | | |
| | SA00932SE | | Installation of the Stewart wing tip assembly | | |
| | SA01333CH | | Installation of a 24-gallon wing fuel tanks. | | |
| | SA1350WE | | Replace existing fabric on wings, fuselage, empennage and/or control surfaces with fiberglass... | | |
| | SA02153AK | | Installation of Burl’s Aircraft Rebuild Magnum I tail wheel Penetration ski | | |
| | SA2-952 | | Installation of fiberglass covering. | | |
| | SA00530SE | | Installation of vortex generators on leading edge of upper side of wing. | | |
| | SA01944CH (2 OF 2) | | Modify airplane to fly on unleaded automotive gasoline, 87 minimum antiknock index, per ASTM... | | |
| | SA1351WE (PG 2) | | Replace existing fabric on wings, fuselage, empennage, and/or control surfaces, with Ceconite101... | | |
| | SA00780SE (PAGE 4) | | Installation of the True Lock Safety Retention Axle Lock Nut System | | |
| | SA01251SE | | The manufacture of a Sunvisor System. | | |
| | SA02093AK | | Installation of hourmeter airspeed switch. | | |
| | SA615EA (PAGE 2) | | Installation of a Whelen Anti-Collision Strobe Light System as replacement for originally installed... | | |
| | SA5156NM (PG 3) | | Fabrication and installation of Pulsar-MOSFET Landing Light Flasher System | | |
| | SA5156NM (PG 2) | | Fabrication and installation of Pulsar-MOSFET Landing Light Flasher System | | |
| | SA02110CH (PAGE 3) | | Installation of a Time Trac Data Recorder | | |
| | SA02110CH (PAGE 4) | | Installation of a Time Trac Data Recorder | | |
| | SA02110CH (PAGE 1) | | Installation of a Time Trac Data Recorder | | |
| | SA02203AK (PAGE 3) | | Installation of FlightLogic Synthetic Vision Electronic Flight Information System (EFIS-SV). | | |
| | SA02203AK (PAGE 1) | | Installation of FlightLogic Synthetic Vision Electronic Flight Information System (EFIS-SV). | | |
| | SA01765SE (PAGE 2) | | Installation of Alaskan Bushwheel Inc (ABI) TSO-C26d wheels, Part Number (P/N) ABI-1010. | | |
| | SA2687NM (PAGE 2) | | Installation of Truboplus/ Electronics Int'l gauges and switches. | | |
 | | SA01435SE | | Installation of J.P. Instruments (JPI) Primary Engine Data Management System | | |
| | SA01861SE (PAGE 3) | | Fabrication and installation of Landing Light Controller | | |
| | SA01861SE (PAGE 2) | | Fabrication and installation of Landing Light Controller | | |
| | SA01861SE (PAGE 4) | | Fabrication and installation of Landing Light Controller | | |
| | SA01861SE (PAGE 5) | | Fabrication and installation of Landing Light Controller | | |
| | SA2167NM | | Installation of the Precise Flight stand-by vacuum system (SVS). | | |
| | SA02293AK (2 OF 3) | | Installation of FlightLogic Synthetic Vision Electronic Flight Information System (EFIS-SV). | | |
| | SA1455NM | | Installation of a flame proof auxiliary heater-dryer, Model12-1600. | | |
| | SA5159NM (1 OF 2) | | Installation of chip detector system. | | |
| | SA02203AK (PAGE 2) | | Installation of FlightLogic Synthetic Vision Electronic Flight Information System (EFIS-SV). | | |
| | SA4305WE | | Installation of GAR-AERO wheel adapters and tundra type tires on the main landing gear | | |
| | SA01765SE | | Installation of Alaskan Bushwheel TSO-C26d wheels, Part Number (P/N) ABI-1010 | | |
| | SA01233SE | | Manufacture and installation of Alaskan Bushwheel tail wheel and fork assembly | | |
| | SA2693NM (PAGE 2) | | Installation of Electronics International digital volt/amp gauges and accessories. | | |
| | SA02110CH (PAGE 2) | | Installation of a Time Trac Data Recorder | | |
| | SA02033AT (PAGE 3) | | Modification to install an air-oil separator to prevent oil from being aspirated from the engine... | | |
| | SA09470SC | | Installation of Starter Indicator light system. | | |
| | SA02987CH | | Installation of the Electroair Electronic Ignition System | | |
| | SA2666WE | | Ceconite 102 material covering complete aircraft. (262A SERIES -12) | | |
| | SA02428AK | | Installation of a hydraulically actuated ski drag assembly | | |
| | SA01026SE (PAGE 1) | | Improved fuel gascolator assembly. | | |
| | SA00068SE (PAGE 2) | | Installation of fuel flow/pressure instruments. (W/TSIO-360-MB1) | | |
| | SA4-1210 | | Installation of Eonnex cover on aircraft surfaces. | | |
| | SA02168AK (PG 1) | | Installation of hourmeter airspeed switch. For unpressurized aircraft only. Pressurized aircraft... | | |
| | SA00780SE (PAGE 2) | | Installation of the True Lock Safety Retention Axle Lock Nut System | | |
| | SA00780SE (PAGE 1) | | Installation of the True Lock Safety Retention Axle Lock Nut System | | |
| | SA00780SE (PAGE 3) | | Installation of the True Lock Safety Retention Axle Lock Nut System | | |
| | SA01026SE (PAGE 2) | | Improved fuel gascolator assembly. | | |
| | SA01988SE (PAGE 2) | | Installation of Electronics International Inc. Glass Panel Engine Monitor (with In-Flight Data)... | | |
| | SA01988SE (PAGE 3) | | Installation of Electronics International Inc. Glass Panel Engine Monitor (with In-Flight Data)... | | |
| | SA01988SE (PAGE 6) | | Installation of Electronics International Inc. Glass Panel Engine Monitor (with In-Flight Data)... | | |
| | SA01988SE (PAGE 1) | | Installation of Electronics International Inc. Glass Panel Engine Monitor (with In-Flight Data)... | | |
| | SA01988SE (PAGE 5) | | Installation of Electronics International Inc. Glass Panel Engine Monitor (with In-Flight Data)... | | |
| | SA01988SE (PAGE 4) | | Installation of Electronics International Inc. Glass Panel Engine Monitor (with In-Flight Data)... | | |
| | SA00215NY | | Installation of CAVU Model AM100 AVMIX engine fuel/air mixture setting system. | | |
| | SA2844CE (1 OF 2) | | Installation of a plastic cap enclosure over the anti-collision strobe light system. | | |
| | SA01015SE | | Installation of eligible Alaska Bushwheel, Inc. wheels and TSO-C62d tires | | |
| | SA02283SE Page 2 | | Installation of Electronics International Inc. Glass Panel Engine Monitor (with In Flight Data)... | | |
| | SA7965SW | | Application of fabric and polyurethane finishing system. | | |
| | SA2687NM (PAGE 1) | | Installation of Truboplus/ Electronics Int'l gauges and switches. | | |
| | SA02553AK | | Fabrication and installation of a Tail Wheel Anti-Shimmy Dampener | | |
| | SA01800SE (PG 2) | | Fabrication and installation of new or replacement of existing instrument panel lights dimmer... | | |
| | SA01800SE (PG 4) | | Fabrication and installation of new or replacement of existing instrument panel lights dimmer... | | |
| | SA01800SE (PG 3) | | Fabrication and installation of new or replacement of existing instrument panel lights dimmer... | | |
| | SA01800SE (PG 1) | | Fabrication and installation of new or replacement of existing instrument panel lights dimmer... | | |
| | SA00024NY | | Installation of Airwolf remote mounted engine oil filter kit AFC-K007 on single or multi-engine... | | |
| | SA02402SE Page 2 | | Installation of Electronics International Inc. Glass Panel Engine Monitor (with In-Flight Data)... | | |
| | SA5156NM | | Fabrication and installation of Pulsar-MOSFET Landing Light Flasher System | | |
| | SA00068SE (PAGE 1) | | Installation of fuel flow/pressure instruments. (W/TSIO-360-MB1) | | |
| | SA00680SE (5 OF 6 | | Installation of Electronics International model UBG-16 or UBG-16T bar graph engine analyzer. | | |
| | SA5926NM | | Installation of manifold pressure instrument. | | |
| | SA01831WI | | To allow the use of UL91 (minimum) grade aviation fuel | | |
| | SA2190NM Page 1 | | Installation of electronics International Digital Volt/Amp Gauges and Accessories. | | |
| | SA1626NM Page 2 | | Installation of Electronics Int'l Digital EGT/CHT Instruments and accessories. (201 Series) | | |
| | SA4005NM (Page 1) | | Precise Flight Inc. Pulselite Control System | | |
| | SA02268CH (PAGE 6) | | Installation of Airwolf Filter Corp. Air Oil Separator | | |
| | SA02268CH (PAGE 4) | | Installation of Airwolf Filter Corp. Air Oil Separator | | |
| | SA02268CH (PAGE 5) | | Installation of Airwolf Filter Corp. Air Oil Separator | | |
| | SA02268CH (PAGE 2) | | Installation of Airwolf Filter Corp. Air Oil Separator | | |
| | SA02268CH (PAGE 1) | | Installation of Airwolf Filter Corp. Air Oil Separator | | |
| | SA04280CH | |
Install rocker switch assemblies on dual magneto configuration in accordance with Electroair... | | |
| | SA03148NY (Page 2) | | The installation of the Latitude Technologies Corporation S100 Tracking System | | |
| | SA2190NM Page 2 | | Installation of electronics International Digital Volt/Amp Gauges and Accessories. | | |
| | SA5924NM | | Installation of RPM instrument. | | |
| | SA5925NM | | Installation of oil pressure/temperature instrument. | | |
| | SA00680SE (3 OF 6 | | Installation of Electronics International model UBG-16 or UBG-16T bar graph engine analyzer. | | |
| | SA00680SE (6 OF 6 | | Installation of Electronics International model UBG-16 or UBG-16T bar graph engine analyzer. | | |
| | SA00680SE (2 OF 6 | | Installation of Electronics International model UBG-16 or UBG-16T bar graph engine analyzer. | | |
| | SA00680SE (4 OF 6 | | Installation of Electronics International model UBG-16 or UBG-16T bar graph engine analyzer. | | |
| | SA1008WE | | Installation of Poly-Fiber covering material. | | |
| | SA02386AK | | Replacement of existing landing and/or taxi light reflector and bulbs with Light Emitting Diode... | | |
| | SA04032CH | | Install rocker switch assemblies | | |
| | SA00478CH | | Installation of Cooper Superflite 102 Fabric. | | |
| | SA02825NY Page 2 | | Installation of Aerospace Logic Aircraft Instruments | | |
| | SA01734SE (PG 3) | | Application of Stewart Systems synthetic fabric covering system to aircraft fuselage, wings, tail... | | |
| | SA01861SE (PAGE 1) | | Fabrication and installation of Landing Light Controller | | |
| | SA04165NY (Page 1) | | Installation of Latitude Technologies Skynode S200 Satcom system must be performed | | |
| | SA01734SE (PG 1) | | Application of Stewart Systems synthetic fabric covering system to aircraft fuselage, wings, tail... | | |
| | SA02212AK (PG 2) | | Replacement of existing landing and/or taxi light reflector and bulbs with high intensity discharge... | | |
| | SA01158WI | | Installation of Aero Enhancements UV250-1 Supplemental Instrument Panel Lightning System. | | |
| | SA03148NY (Page 1) | | The installation of the Latitude Technologies Corporation S100 Tracking System | | |
| | SA4005NM (Page 2) | | Precise Flight Inc. Pulselite Control System | | |
| | SA00344BO PAGE 2 | | Installation of Parmetheus Plus LED PAR36 and PAR46 taxi and landing lights. | | |
| | SA04776NY (1 OF 2) | | The HIPEC Covering and Finishing System must be performed and maintained | | |
| | SA00081NY | | Installation of Iceman Aviation Supplies, Inc. Carburetor Ice Detector. | | |
| | SA489EA | | Installation of ARP Inc. carburetor ice detection system | | |